Arista vEOS, Руководство по настройке

Страница: 68 / 128

Figure 11: Locating the IP address and DNS
NOTE: If either of these fields is not populated, your instance still deploys. Refresh the page after a couple
of minutes.
4. Secure Shell (SSH) to your Virtual Machine (VM) using the IP address or Domain Name Server (DNS) name
found in the previous step, using the credentials you gave when you initially setup the VM.
bash# ssh myusername@123.123.123.1
Password: *********
NOTE: It may take between 5-10 minutes for the instance to become reachable after the deployment starts.
Refer to the section
Troubleshooting Instance on page 69 for additional information.
vEOS Router Startup-Configuration using Instance Custom-Data
Describes launch employing custom-data information.
During the initial launching of the vEOS Router Instance, Azure provides a feature to upload custom-data. The
administrator can upload vEOS Router configuration using custom-data at the time of the launching of the vEOS
Router Instance.
Custom-data can be used to pass in configuration for multiple entities. Currently, only the EOS configuration is
supported in Azure. This configuration must be separated by start and end markers.
vEOS Router Configuration Guide 68