manualshive.com logo in svg

Arista vEOS, Руководство по настройке

Поделиться
Скачать
Arista vEOS Скачать руководство пользователя страница 19

The cloud high-availability command places the vEOS in the cloud-ha configuration mode. This example
enables cloud high-availability and configures the peer veos2.

veos(config)#cloud high-availability
veos(config-cloud-ha)#no shutdown
veos(config-cloud-ha)#peer veos2
veos(config-cloud-ha-peer-veos2)#

Configuring BFD

To configure the BFD link between the HA pair of vEOS Routers that is used to detect peer failure, the peer IP
address and local BFD source interface must be provided. The following example configures Tunnel 2 as a single
hop for the source interface for BFD.

veos(config)#cloud high-availability
veos(config-cloud-ha)#peer veos2
veos(config-cloud-ha-peer-veos2)#bfd source-interface tunnel 2 single-hop

Configuring the Recovery Time

The recovery wait-time command in the cloud-ha configuration sub-mode configures the amount of time to
take back control of local route tables after failure recovery. The following example shows the wait time is
configured to 90 seconds.

veos(config-cloud-ha-peer-veos2)#recovery wait-time 90

Full Configurations

AWS VPN Specific Cloud Full Configuration

The following AWS configuration is vaild for use with the IAM role.

cloud provider aws
 region us-west-1
!
cloud high-availability
 no shutdown
 !
 peer veos2
  aws
   backup-gateway  rtb-40b72d24 0.0.0.0/0 local-cloud-interface eni-26cb1d27

   backup-gateway  rtb-17b32973 0.0.0.0/0 local-cloud-interface eni-1589e714

   backup-gateway  rtb-54503330 0.0.0.0/0 local-cloud-interface eni-56cf1957

   primary-gateway rtb-a4be24c0 0.0.0.0/0 local-cloud-interface eni-26cb1d27

   primary-gateway rtb-40b72d24 0.0.0.0/0 local-cloud-interface eni-56cf1957

   primary-gateway rtb-63b02a07 0.0.0.0/0 local-cloud-interface eni-1589e714

  peer address 10.2.201.149
  recovery wait-time 5
  bfd source-interface Ethernet1
!

Azure Full Configuration

19

Cloud High Availability

Содержание vEOS

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды