Arista DCS-7504, Быстрый старт

Страница: 14 / 46

10 Quick Start Guide: 7500 Series Modular Data Center Switches
Two-Post Rack Mount Chapter 3: Rack Mounting the Switch
Figure 3-1: Attaching the Center-mount Brackets
3.1.2 Inserting the Switch into the Rack
Step 1 Move the chassis to the rack using a mechanical lift ( Figure 3-2 ).
If modules are inserted in the chassis, use the lift carefully to avoid damaging any components.
Step 2 Lift the chassis into the rack. Position the flanges against the rack posts ( Figure 3-2 ).
Figure 3-2: Lifting the Switch Chassis into the Two Post Rack
Step 3 Select mounting screws that fit your equipment rack.
A minimum of four screws is required on each side of the chassis. The accessory kit provides
screws that fit many common equipment racks. When installing the switch into a rack with
unthreaded post holes, nuts are also required to secure the switch to the rack posts.
Center-mount brackets