Arista DCA-NDR-A5 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 34

background image

•

<ip> - IP address of the management interface

•

<netmask> - Netmask of the network (for example, 255.255.255.0)

•

<default gateway> - Default gateway of the network

CLI displays the following prompt:

Applying network settings now might cause the network to disconnect.

If you do not apply network settings now, network settings will

take effect only after running "apply" and "reboot"

Do you want to apply network settings now? (y/n)

2. Enter

y

.

3. Enter the

apply

command to apply the changes.

4. If no further configuration changes are required, enter the

reboot

command to restart the device.

5.2.2

Configuring DNS

You must set up Domain Name Servers (DNS) in Awake appliances to use hostname instead of IP
addresses. Perform the following steps to configure DNS:

1. Enter the

set dns nameservers

command.

An interactive prompt will ask for primary and secondary servers.

2. Enter the primary and secondary DNS.
3. Enter the

apply

command to apply the changes.

4. If no further configuration changes are required, enter the

reboot

command to restart the device.

5.2.3

Configuring NTP

You must configure the Network Time Protocol (NTP) in all of your Awake appliances to ensure the
accuracy of the appliance clock. Perform the following steps to configure NTP:

1. Enter the

set ntp servers

command.

An interactive prompt will ask for primary and secondary servers.

2. Enter the primary and secondary servers.
3. Enter the

apply

command to apply the changes.

4. If no further configuration changes are required, enter the

reboot

command to restart the device.

5.2.4

Configuring Proxy

Awake appliances support outgoing connection using the customer's proxy (without SSL interception).
Perform the following steps to configure proxy for outgoing connections:

1. Enter the

set proxy servers

command.

2. Enter the required details when an interactive prompt asks for the following information:

•

Host: The IP address of the proxy server.

Note: You may enter the hostname instead of the IP address if DNS already has been
configured, applied, and the system was rebooted.

•

Port: The port of the proxy server

•

Username / password: Enter the credentials if the proxy requires authentication.

3. Enter the

apply

command to apply the changes.

4. If no further configuration changes are required, enter the

reboot

command to restart the device.

5.2.5

Configuring IPMI / DRAC Interface

16

«
...
18
19
20
21
22
...
»

Содержание DCA-NDR-A5



































Отзывы:

Нет отзывов

Похожие инструкции для DCA-NDR-A5

SecPath F1000-AI-X0

Бренд: H3C Страницы: 73

Photosmart 7500

Бренд: HP Страницы: 84

Бренд: Barracuda Страницы: 7

NG FIREWALL 5.0.3

Бренд: Barracuda Networks Страницы: 24

Бренд: Lindy Страницы: 4

Бренд: Freedom9 Страницы: 310

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды