16
Installation Instructions
���� ����
���� ����
�������
Connecting the ductwork
•
Install ductwork, making connections in the direction of airflow as illustrated.
•
Push duct over the exhaust outlet.
•
Wrap all duct joints and the flange connections with duct tape for an airtight seal.
•
Make the same connection in the wall or ceiling vent exit.
making the electrical connections
wARNING:
ELECTRICAL ShOCK hAZARD
TURN OFF POwER CIRCUIT AT ThE SERVICE PANEL BEFORE wIRING ThIS UNIT.
10 V, 15 OR 0 AmP CIRCUIT REqUIRED.
IF hOUSE wIRING IS NOT A wIRE INSTALLATION (NEUTRAL, LINE AND GROUND), A GROUND mUST BE
PROVIDED By ThE INSTALLER. whEN hOUSE wIRING IS ALUmINUm, BE SURE TO USE U.L. APPROVED
ANTI-OXIDANT COmPOUND AND ALUmINUm-TO-COPPER CONNECTORS.
ELECTRICAL GROUNDING INSTRUCTIONS
THIS APPLIANCE IS FITTED WITH AN ELECTRICAL JUNCTION BOX WITH THREE WIRES, THE WIRE COLOR
GREEN / YELLOW SERVES TO GROUND THE APPLIANCE. TO PROTECT YOU AGAINST ELECTRIC SHOCK,
THE GREEN/YELLOW WIRE MUST BE CONNECTED TO THE GROUNDING WIRE IN YOUR HOME ELECTRICAL
SYSTEM, AND IT MUST UNDER NO CIRCUMSTANCES BE CUT OR REMOVED. FAILURE TO DO SO CAN RESULT
IN DEATH OR ELECTRICAL SHOCK.
•
Remove junction box cover and knockout on the top left side.
