ARIB 8494B Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 39

ARIB 8494B Скачать руководство пользователя страница 25

ARIB STD-T91

-19-

The frequency band used for the UWB radio function is also used for radio

equipment of other radio systems.

1. The use of equipment with UWB radio function shall be limited to

indoors, i.e. within environments such as houses, apartments, buildings,

etc. Not approved for outdoor use.

Even when used indoors, such as at broadcast events , please confirm

with the event organizer about the use of UWB radio function as it might

cause interference to broadcasting operations.

2. The use of equipment with UWB radio function may cause influence

to radio astronomy operations, etc. When the equipment is used near a

radio astronomy observatory, contact the following address.

3. In case that harmful interference to other non-UWB radio equipment

(satellite earth station antennas, 5GHz band wireless LAN, mobile phones,

etc.) is caused due to the emission from the UWB radio function of the

equipment, take discretionary actions, such as to remove the UWB radio

equipment from the interfering area. If interference remains, promptly stop

the radio emission and contact the following address:

Contact us at :

Note: The ”UWB radio function“ stated in the operation manual refers to

the wireless communication function of the UWB radio systems,

(2) Catalogs, brochures, websites

Vendors shall include similar warning message as shown in the operational manuals

in catalogs, brochures, websites, etc.

(3) Indication by labels

Vendors shall indicate one of the following messages visibly displayed on the UWB radio

equipment.

«
...
23
24
25
26
27
...
»

Содержание 8494B








































Отзывы:

Нет отзывов