ARIB 8494B Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 39

ARIB 8494B Скачать руководство пользователя страница 13

ARIB STD-T91

-7-

Peak power per 50MHz bandwidth shall be 0 dBm or less.

As an interim measure until December 31, 2008, the following condition

shall apply:

Of radio equipment with use of frequency from 3.4 GHz to 4.8 GHz, those

without an interference mitigation function stipulated in 3.4 (2) shall have

a peak power of -30 dBm or less per 50 MHz bandwidth within the

frequency band from 3.4 GHz to 4.2 GHz, and the peak power of 0 dBm or

less per 50 MHz bandwidth within the frequency band from 4.2 GHz to 4.8

GHz. (According to ORE, Supplementary provision (MIC Ordinance No.

105 on August 1, 2006).)

(3) Tolerances for antenna power (ORE, Article 14)

The tolerance of the antenna power from shall be less than the allowed maximum

value + 20%.

(4) Transmission data rate (ORE, Article 49.27)

Transmission data rate shall be higher than 50 Mbps excepting for such cases as noise

or interference from other radio stations need be avoided.

(5) Frequency bandwidth (ORE, Article 49.27)

Frequency bandwidth between the upper and lower frequencies for which the

radiation power drops 10 dB below the maximum radiation power shall be 450 MHz or

more.

(6) Permissible values for occupied bandwidth (ORE, Article 6 / Table 2-49.)

Permissible values for the occupied bandwidth shall be as follows:

For those with use of the frequency from 3.4 GHz to 4.8 GHz

1.4 GHz

For those with use of the frequency from 7.25 GHz to 10.25 GHz

3 GHz

(7) Permissible values for unwanted emission intensity (ORE, Article 7 / Table 3-41)

Permissible values for the unwanted emission intensity from the transmitter are as

follows:

«
...
11
12
13
14
15
...
»

Содержание 8494B








































Отзывы:

Нет отзывов