33
Route the lap belt through the belt path openings
on both sides of base and under the belt lock-off.
Make sure not to twist the belt and make sure it lies
flat.
Fasten the buckle until it clicks into place.
Push down on the foot end of base and pull the
free end of the lap belt to tighten base against the
vehicle seat. CHECK to make sure base is secure
by holding both sides of the base near the lap belt
and moving it from side to side and front and back.
The lap belt should not loosen and the base should
not move easily. The base should not move more
than 1 inch (2.5 cm) from side to side or front to
back.
Close the lock off over the lap belt until it clicks
into places.
4
5
4
5
4
5
4
5
4
5
4
5
4
5
BEFORE installing base, make sure
vehicle is on level ground. Place
base on an approved vehicle seat
location.