e2v technologies (uk) limited 2013
CR 114528
05 Apr 2013
DAS775571AA Version 1, page 26
7. CLEANING, MAINTENANCE AND
REPLACEABLE PARTS
7.1 Cleaning
After use and prior to stowing, the camera should be cleaned. This is best
carried out using a cloth soaked with warm soapy water.
Solvents should not
be used. If in doubt, contact your supplier.
7.2 Maintenance
No routine maintenance is required for the camera. If it is not in regular use, it
should be switched on for a period of ten minutes every month to check
correct operation.
7.3 Replaceable Parts
The following items may be substituted by the user:
Item
Description
USB Lead
USB cable with Type B connector (2 metres)
Vehicle
Charger Lead
Fuse
250 V 2 A Fast Acting Fuse, UL Certified. 1.25 x 0.25
inch (32 x 6 mm).
Do not use any other fuse type or rating.
The following items are available as spares and accessories from e2v:
Part No.
Description
ARG_MI_BLPS
Mi-TIC Rechargeable Battery Standard (2.5 hours)
ARG_MI_BLPL
Mi-TIC Rechargeable Battery Pack Large (5 hours)
ARG_MI_CS
Mi-TIC Charger Station
ARG_MI_PSU
Mi-TIC Power Supply
ARG_MI_SS
Mi-TIC Sunshroud
ARG_MI_RL
Mi-TIC Retractable Lanyard
ARG_MI_LL
Mi-TIC Double Lanyard Loop
ARG_MI_RW
Mi-TIC Replacement Window
ARG_MI_RAIL
Mi-TIC Picatinny Rail
ARG_MI_PCLIP
Mi-TIC Pocket Clip
ARG_MI_DB
Mi-TIC Display Bumper
ARG_MI_LED
Streamlight LED Light
ARG_MI_LASER
Streamlight LED Light and Laser
ARG_MI_USB
Mi-TIC USB Lead
THERE ARE NO OTHER USER SERVICEABLE PARTS.
If any damage
beyond these parts occurs, return the camera to e2v technologies or an
authorised repair centre. Any attempt at repair by unauthorised personnel may
cause serious damage and will invalidate the warranty.