PT-20 Programming Guide
25
Description
：
This function can reset scan module,if reset OK,this function will return
1,else will return 0.
Returns
：
0:Reset fail.
1:Reset OK.
Scanner_Config_Start
Purpose
：
To start scanner setting procedure.
Syntax
：
void Scanner_Config_Start(void);
Example call
：
Scanner_Config_Start();
Includes
：
#include “SDK.h ”
Description
：
This function can starting scanner setting procedure.
Returns
：
None
Scanner_Config_End
Purpose
：
To end scanner setting procedure.
Syntax
：
void Scanner_Config_End(void);
Example call
：
Scanner_Config_End();
Includes
：
#include “SDK.h ”
Description
：
This function can ending scanner setting procedure.
Returns
：
None
Scan_SendCommand
Purpose
：
Send scanner(CCD) command to change scanner status.
Syntax
：
BOOL SCAN_SendCommand(int Command1,int Command2,char
*pValue);
Example call
：
char ssValue = 0;
If(SCAN_SendCommand(6,7,&ssValue))
_printf_color(COLOR_
RED, “Setup complete!”);
Includes
：
#include “SDK.h ”
Description
：
This function can send command to set scanner status.
You can see “
Appendix 1
” to know about the command setting.
Returns
：
0:Send fail.
1:Send OK.
Scan_SendCommand_Laser
Purpose
：
Send scanner(Laser) command to change scanner status.
Syntax
：
BOOL SCAN_SendCommand_Laser(int Command1,int
Command2,char *pValue);
Example call
：
char ssValue = 0;
If(SCAN_SendCommand_Laser(6,7,&ssValue))
_printf_color(COLOR_RED, “Setup complete!”);
Includes
：
#include “SDK.h ”
