P4 Series
User Manual
22
2.5
Paper Support Roller
Important
if the label length is less than 45 mm, width is less than 50
mm, gap is more than 3 mm, and the media roll is outside wound. We
recommend you use the paper support roller
A paper support roller is used to prevent paper jam. It is placed between the
Media Shaft
and the
Media Roll Holders
. When paper is moving forward during
the printing, it might be curled or crumpled and cause paper jam. The roller can
hold the paper down to solve this problem.
To install a paper support roller:
1.
Insert the right end of the rod to the hole of the right bracket holder.
2.
Place the left end of the rod on the left bracket holder.
