Additional Components
Please check you have all the fittings listed below
Note:
The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
M
N
O
P
30mm Screw x 1
Rawl plug x 1
Safety strap x1
20mm Screw x 1
Tools required
Drill
(for wall drilling only)
Supplementary Assembly Instructions
O
P
M
N
833/2763 • 833/2811
Step 1
In order to prevent
accidental toppling it is
recommended to secure
the unit to a wall using
the supplied safety strap.
Connect safety strap
O
to rear of the unit as
shown using 1 x 20mm
screw
P
(
note
: this
screw replaces the back
panel screw
E
detailed
in the main instructions).
Step 2
Secure safety strap to
wall using 30mm screw
M
and rawl plug
N
as
shown.
Note:
please refer to the
reverse of this instruction
sheet for additional wall
fixing options.
Warning:
Before drilling,
check wall for
hidden pipes
and cables.
