HELPLINE NO 08454 505299
9
ORIGINAL INSTRUCTIONS
PLUG REPLACEMENT
Your Power Tool is supplied with a
fitt
ed
plug, however if you need to
fit
a new plug
follow the instruction below.
IMPORTANT
The wires in the mains lead are coloured in
accordance with the following code:
Blue = Neutral Brown = Live
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured blue must be
connected to the terminal which is marked
with
N
.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L.
If a 13 AMP (BS 1363/A) Plug is used, a
13 AMP Fuse must be
fitt
ed, or if any other
type of plug is used a 13 AMP Fuse must be
fitt
ed, either in the Plug or Adaptor, or on the
Distribution Board.
Note:
If a moulded plug i
s fitt
ed and has to
be removed take great care in disposing
of the plug and severed cable, it must
be destroyed to prevent engaging into a
socket.
If the supply cord is damaged it must be
replaced by a service agent or a similarly
quali
fi
ed person in order to avoid hazard.
