Assembly Instructions
9
Step
12
Step
13
B
E
y
y
x
x
b:
Fit the back
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
onto the unit.
Nail around the
outside edges of the
back .
Note:
Nails should be
spaced about 150mm
apart.
Stand the unit up for
the next step.
5
D
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
5
D
5
4
4
K
Fit the hanging rail(s)
Push the hanging rail(s)
. into the rail holders
fitted to the side panels.
4
K
Warning:
The
unit is heavy.
Lift with care.
Note:
Do not fit the hanging rail(s)
if you are fitting the shelf pack.
