w w w . a r g o n a u d i o . c o m
9
S t r e a m 3 M
Auto-update
Auto-update works with data sent over DAB, FM or the Internet.
The clock is only updated when in a corresponding mode, so it is
best to select a mode you use regularly.
DAB
and
FM
use time signals broadcast with
radio transmissions.
Network
uses a time signal sent from the Frontier Silicon Internet
radio portal when in any network-connected mode.
1. Select
Update from DAB
,
Update from FM
,
Update from Network
or
No update
.
2. If you are updating from the network, set your time zone.
3. If your country uses daylight saving, the automatically updated time from the network may be wrong
by one hour. When daylight savings are in effect (during the winter), turn on the
Daylight savings
option to rectify this.
Note that if you are updating the time from DAB or FM, the
Daylight savings
option has no effect on
the clock’s time.
Stream3M will auto-update from the selected source when time information is available.
Manual set
If you set
No update
, the wizard now prompts you to set the time and date manually.
The date and time are displayed as
dd-mm-yyyy
and
hh:mm AM/PM
with the first value,
dd
, active (flashing).
Adjust each value with the Select control. As each value
is set, the next value becomes active and flashes.
3.1.3 Network
Stream3M is compatible with all common network protocols and encryption methods, including
Wi-Fi Protected
Setup
(WPS).
To connect Stream3M to your network, you need a Wi-Fi wireless router, together with password key if set
Select
WLAN region/country > Wi-Fi network
(SSID)
, and then select a network from the list.
If the network is open (non-encrypted), Spotify connects
without any further ado; see
Completion
below.
Standard encrypted network
To enter the network’s key (password), use the Select
control to move the cursor through the characters and
select.
As each character is selected, the key is built up near the
top of the display.
There are three options accessible by turning Select
back before the first characters (0123…)
–
Backspace
,
OK
and
Cancel
.
WPS encrypted network
WPS encrypted networks are identified by ‘[WPS]’ at the
start of the network name, and have three methods of
connection. Select one and follow the prompts: