w w w . a r g o n a u d i o . c o m
13
S t r e a m 3 M
3.5 Sharing media with Windows Media Player
The most common UPnP server is Windows Media Player (10 or later). Alternatively, other UPnP
platforms and servers may be used. To set up WMP for media sharing, perform the following steps:
1. Ensure that the PC is connected to the network.
2. Ensure that the radio is powered on and connected to the same network.
3. In WMP, add to the media library the audio files and folders you want to share with Stream3M
(
Library
>
Add to Library…
).
4. In WMP, enable media sharing (
Library
>
Media sharing…
).
Notice: setup can differ depending on which version of WMP you have
Notice; it may show; Argon Stream3M, “Unknown device”, “Frontier Silicon” or the Jupiter logo as shown below.
Make sure that the radio has access to the shared media by selecting it and clicking
Allow
. You can
also set a name for the shared media in
Settings…
Click
OK
to close the dialogue boxes.
The PC is now ready to stream the music to the radio. The WMP UPnP service runs in the background;
there is no need to start WMP explicitly.
3.6 Setting up Stream3M for “Play To” in Windows 7.(Notice: Windows 10 don’t need
this procedure for setup)
1. To set-up Argon Stream3M to be controlled and to stream music via Windows Media Player 12, perform
the following steps:
2. Ensure that the PC is connected to the network.
3. Ensure that Stream3M is powered on and connected to the same network.
Note:
Stream3M must be in an Internet radio mode to be detected.
4. From the Windows main screen,
select
Start
>
Devices and Printers
.
5. Select the
Add a device
tab in the top left of the Devices
and Printers window and follow the instruction prompts given
by the wizard.