w w w . a r g o n a u d i o . c o m
7
S t r e a m 3 M
The
Standby screen
shows the time, date and any active
alarm times.
As you cycle through the play modes using Mode ,
Argon Stream3M shows a
splash screen
for each
mode. After one second, Argon Stream3M enters the
selected mode and tries to start playing the last station
or track that was playing in that mode. If this is not
possible, Argon Stream3M tries to connect to the
selected source by scanning for stations, networks, or
prompting for user input as appropriate.
Now playing screens
show information about the audio
source and track now playing, where available.
Dialogue screens
are shown to allow the user to
change settings. They vary in complexity from simple
Yes/No options up to the scrollable network password
input screen.
As with menus, the selected item is shown with a white
background.
Dialogue screens mark the current setting with an
asterisk (*).
Error/Information screens
give specific messages for a
few seconds, then change automatically to another
screen.
Menus
Argon Stream3M has basically three types of menu. Use the Select control to step through and select
options. A scroll bar on the right of the screen shows if there are further options above or below those
visible.
Each mode has a
Mode menu
,
with options specific to that mode.
For example, the FM mode menu has just two options:
Scan setting and Audio setting.
In addition, each mode menu has two final options:
System settings >
and
Main menu >
.
The ‘
>
’ indicates options leading to further menus.