© ARGO S.A.
www.argo.pl
8
EN
OPERATION INSTRUCTION
HOT LAMINATION
If the document is not laminated properly repeat steps 3 to 4.
CAUTION!
It is important to use the pouch similar to the size of the laminating document.
Documents need to be inserted into the laminating pouch squarely and centrally,
with a margin of around 3 mm from each side. A wider margin may cause folding,
bending or blocking of the laminated document.
HOW TO TURN OFF THE LAMINATING MACHINE
Let the machine cool down for about 30 minutes. Select OFF with a slider, then unplug
the machine from the socket. The machine is turned off now.
CLEANING THE ROLLERS
Before and after the lamination use a cleaning paper to clean the rollers from dust and
glue. When the temperature is rising, place the cleaning paper and make it go through
the laminating machine a few times. It will protect the machines from laminating pouches
being pulled between the rollers. The cleaning paper may be replaced with a cardboard
of the grammature around 250 g/m² with a rough texture.
(Fig.1)
Select the pouch thick
-
ness with the SLIDER.
READY LIGHT would
turn into red and flash.
(Fig.4)
The laminating process is
finished when the whole
document comes out
from the other end of the
machine.
(Fig.2)
The machine is ready
to use when you hear
the beep sound and the
READY LIGHT turns to
green and stays steady.
(Fig.5)
If the pouch gets jammed
inside, you will hear the
beep sound. Press the
REVERSE BUTTON and
hold it until the pouch is
removed.
(Fig.3)
Insert the document with
the sealed side first into
the entry.
(Fig.6)
To turn off the laminating
machine select OFF posi
-
tion with a SLIDER.
