Argo MAGICO 9.2 AMG26MIR, Технические данные и руководство по обслуживанию

Страница: 13 / 19

5-8 Manual Unit Control and LED Indicators
The push button switch and the LED indicators on the front of unit let the user to control the unit operation
without a remote controller. Their operations are provided below.
Led indicators:
STAND BY 1. Lights up when the air conditioner is connected to power and is ready
to receive the R/C commands
2. Blinks continuosly in case of any thermistor failure
OPERATION 1. Lights up in operation mode (note: off in stanby mode)
2. Blinks for 0,5 sec to announce that a R/C infrared signal has been received and stored
TIMER 1. Lights up during Timer and Sleep operation
2. Active on/off timer setting will become invalid after a power failure
When this happens, the unit is forced to restart in STBY mode, and the timer indicator
indicator is blinked continuosly until (i) the unit is switched to OPERATION mode again ,
or (ii) any message from the R/C is received
Push button switches:
OPERATION Use to cycle the operation mode of the A/C unit among COOL and OFF modes,
BUTTON
without using the R/C
Every time this switch is pressed, the next operation mode is selected, in the order:
Off mode => Cool mode => Off mode => Cool mode => …….
5-9 Recovery from Power Failure
Last unit settings (SPT, operation mode, etc) are saved in the EEPROM in the unit.
In case of power failure, these settings are restored automatically.
13