![Argo K70N142T Скачать руководство пользователя страница 42](http://html1.mh-extra.com/html/argo/k70n142t/k70n142t_installation-instructions-manual_2967528042.webp)
22
Set the remote controller as shown in the table.
C
SETTING
AUTO
AUTO
ON
OFF
Any
Any
flap
filter
Fan
BUTTON
working mode (COOL - HEAT)
set point
night mode / high mode
iFeel
(2) ADDRESS SETTING THROUGH REMOTE CONTROLLER (UP TO 8 INDOOR UNITS)
Indoor unit A: 11°C
Indoor unit B: 12°C
Indoor unit C: 13°C
Indoor unit D: 14°C
Indoor unit E: 15°C
Indoor unit F: 16°C
Indoor unit G: 17°C
Indoor unit H: 18°C
At this point, press together FAN + IFEEL buttons for more than 7 seconds and release them pointing the remote controller
to the indoor unit receiver. Be sure to send the signal to only one indoor unit and that there is no other indoor unit that could
receive the same signal. If the signal is received, the indoor unit will emit 5 consecutive beeps.
NOTE: for electrical connections, refrigerant circuit connection and check, consult the Installation Instruction of outdoor
unit.
EG