Subject to change · UMPC 045_31168300 · 0717 · EN
Page 13
www.argo-hytos.com
5.2
Controls
ON / OFF switch
This switch is used to turn the unit on or off when the plug is plugged in.
LubMonVisu
The LubMon Visu is a display device and simultaneously a data memory for the ARGO-HYTOS oil condition sensors.
Readiness indicator
Depending on the switch position of the ON / OFF switch, this light indicates the operating state of the unit.
It lights up as long as the unit is switched on.
Push button "Reset"
This push button is used for reset in the event of a fault or in the case of an automatic switch-off.
It must be actuated in order to restart the device after the message has occurred.
Ball valve
The 3-way ball valve makes it possible to determine whether the oil cleanliness monitoring is to be performed before or after the
filter.
Fig.4: Operating elements 1
ON / OFF switch
LubMon Visu
Readiness indicator
Push button "Reset"
Ball valve
Switching lever
Switching lever
This lever is used to switch the unit from "pumping" mode to "filtering".
Fig.5: Operating elements 2
