17
DANGER
It is strictly prohibited to enable the walk assist mode when you are sitting on the saddle of the electrically power assisted
cycle to avoid the danger of injury and the risk of damaging the electrical components of the bike.
Switching the lights on/off
Press the relevant button for at least 1 second to switch the front light on or off (and rear light, if applicable).
Residual battery charge indicator
The battery charging level is shown on the display by the number of LED lights that are highlighted; see: 0-1-2-3-4-5.
If 5 LED lights are highlighted at the same time, it means that the battery is charged to the maximum percentage set and
detected at the time.
The reduction in the number of led lights simultaneously highlighted indicates that the available battery charge and conse-
quent autonomy is decreasing.
The level of the battery charging indicator may fluctuate depending on how the electrically power assisted cycle is being
used, for example, when going up a slope, the level displayed can drop rapidly as there is a much higher battery consumption.
The individual indicator lights give an indication of the specific battery charge range detected at the time and do not neces-
sarily represent a percentage of the residual autonomy.
Malfunction indicator light
If a malfunction of the electrical and/or electronic system of the bike is detected, all the LED lights on the display will light up
and flash.
Turn off the display and after switching on again identify the anomaly corresponding to the number of flashes highlighted
(flash); the explanatory table follows:
Number of flashes
Malfunction description
2
Malfunction when using the walk assist mode lever
3
Brake sensor malfunction
4
Control unit malfunction
7
Control unit overheated
8
High voltage protection (voltage above threshold)
10
Motor malfunction (excessive power consumption)
11
Motor hall sensor malfunction
17
Display-control unit wiring communication malfunction
18
Display-control unit programming communication malfunction
19
Brake sensor malfunction
20
Motor block