ARGENTO PERFORMANCE, Руководство пользователя

Страница: 12 / 20

1 1 2 2
6. ASSEMBLY
6.1 Performance model assembly
1. Carefully remove the bike from the
packaging, then remove all the protective
material, being careful not to scratch the
painted parts and not pull the bike cables.
The removal of the bike from the packaging
must be carried out by two adults, in order to
avoid injuries or crushing.
2. Insert the front wheel in the housings of
the front fork, tighten the wheel with the quick
closing device.
3. Tighten the front light, make sure that the
front light is correctly aligned with the center
of the fork.
4. Remove the front plate located on the
handlebar stem.
Place the handlebar into the accommodation
of the handlebar stem.
Position the previously removed plate in its
original position and tighten the respective 4
bolts; make sure that the handlebar is in a
central position.
5. Insert the seat post into the bike making
sure to orient the saddle and tighten the seat
post correctly with the appropriate device on
the frame as shown in the photo on the right.
For structural and safety reasons, it is strictly
forbidden to extract the seat post beyond the
limit indicated on the seat post to avoid the
risk of fractures to the frame.
6. Identify the right pedal by means of the R
mark placed on the pedal axis, while the L
mark identifies the left pedal. Tighten the left
pedal anticlockwise and the right pedal
clockwise, in their respective positions to
avoid serious injuries while using the bike
and damaging the bike.
MAKE SURE ALL BOLTS AND PEDALS
ARE TIGHT