18
Checking all the parts
The weight-bearing frame of the EPAC and the welding must be free from any visible defects
such as, cracks, deformations, splits, corrosion, etc.
Make sure that all the bolts and pedals of the EPAC are thoroughly tightened.
Make sure
that the battery is correctly fastened, the cable sheaths are in good condition and the terminal
clamps properly tightened and not corroded.
Check the battery charge status via the indicator on the handlebar display.
We recommend charging the battery after every use of the bike (EPAC) to ensure correct
operation of the battery.
Check the inner tube tyre pressure via the valve on the wheel rim
using a compressor and a pressure gauge gun. Check the state of the tyre tread, rim and
fastening of the wheels to the hubs. If the tyres need replacing, contact the support service or
a qualified tyre specialist. Do not modify the tension of the spokes: any adjustments must be
carried out by specialised staff using suitable tools. The brakes must be adjusted to ensure
efficient braking and the brake lever must also allow adequate pressure to be applied to
regulate the braking, i.e. the brakes must be neither too loose nor too tight.
