ARGENTO AB-EP-Y20, Руководство пользователя

Страница: 19 / 61

18
Function description
Display on/off
Press the ON/OFF button for at least 1 second to switch the display on or off.
Selecting the assisted pedalling level
Press + or - button to increase or decrease the level of selected assisted pedalling.
The display is pre-configured to offer the user 5 different assisted pedalling levels (variable values from 1 to 5).
Assistance level 1 provides minimum electrical assistance from the motor.
Assistance level 5 provides maximum electrical support from the motor.
If you select level 0, you exclude electrical assistance from the motor.
When configuring the display, you can modify the parameter for the interval of assisted pedalling that can be selected: 0-3,
0-5 and 0-9.
These options do not change the minimum and maximum value of electrical assistance provided by the motor, but only allow
a different distribution of the pedalling assistance levels between the minimum and maximum value as described in the table
below:
Number of assisted pedalling levels
3 (1-3) 5 (1-5) 9 (1-9)
- 1 1
- - 2
1 2 3
- - 4
- 3 5
2 - 6
- 4 7
- - 8
3 5 9
Enabling walk assist mode
Select a walk assist level equal to or greater than 1 and then, press and hold– button to enable the walk assist mode which
allows you to activate electric motor assistance up to a speed of 6Km/h.
Disable the function by releasing the – button.
CAUTION
Walk assist mode must be used in compliance with the regulations in force in the country of use and is only allowed when
pushing the electrically power assisted cycle and walking alongside it holding the handlebar grips firmly with both hands.
DANGER
It is strictly prohibited to enable the walk assist mode when you are sitting on the saddle of the electrically power assisted
cycle to avoid the danger of injury and the risk of damaging the electrical components of the bike.
Switching the light on/off
Press the + button for at least 1 second to light up the display screen and switch the front light and rear on or off.
Viewing data (AVG - MAX - TRIP - ODO - Time)
Press the M button quickly to view the successive usage data available for the speed (AVG and MAX), distance travelled (TRIP
and ODO) and duration (Time).