arf SLICK540 120E, Инструкция по эксплуатации, Страница: 36 / 46

5. Assemble the throttle servo mount using the supplied laser cut parts or there is a servo cutout in the
bottom of the engine box for 28cc-38cc engines. Mount your throttle servo and complete your linkage
setup. A hole will need to be drilled on the firewall to allow the pushrod to connect to the throttle arm on
the carb.
6. An extra servo can be fitted for choke or a mechanical linkage can be used.
7. The fuel tank is preassembled. Complete the installation in the fuselage using zip ties or velcro straps
to hold the tank in position. Connect a fuel line between the tank and carb, a fuel line between the tank
vent and the bottom of the fuselage, and a fill line to a fueling port which can be mounted on the fuselage
side opposite your ignition switch. Make sure your vent line does not come close to any hot exhaust part
such as the muffler or canister. recommends the use of small zip ties or fuel line clamps to secure the lines to
the tank.