![Ares Gamma Pro V2 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/ares/gamma-pro-v2/gamma-pro-v2_instruction-manual_2966929008.webp)
8
Locate the landing gear assembly and
insert into slot at the rear of the battery box.
Locate the main wing halves.
Peel the backing from the double stick tape
on the plastic reinforcements.
Locate the LED wiring Y-connector and plug
in the wing LEDs, making sure to maintain
correct orientation of the plugs.
Using two washer head screws, secure the
landing gear to the fuselage.
Slide the two halves partially together.
Make sure that the LED and servo wires
are not pinched between the wing halves.
Slide the wing halves completely together
and press the plastic parts firmly to the wing
surface.
Plug the aileron into the aileron channel
on the NFP board. Tuck the wires into the
fuselage while fitting the wing into position.
See page 11 for NFP
Board Layout and
Orientation
Содержание Gamma Pro V2
Страница 16: ...www Ares RC com 2015 Rev 1 0 2 1 16...