QUICK-START GUIDE
Full manual available to download from: www.Ares-RC.com
18
Unplug the LiPo battery and switch
OFF the transmitter. Re-assemble
the propeller and spinner making
sure to tightly secure the propeller
nut before refitting the spinner
cone.
20
With the throttle stick in the
low position, switch ON the
transmitter. Remove the canopy
and connect the battery to the
ESC whilst keeping well clear of
the live propeller. Refit the canopy
and check again that the control
surfaces move in the correct
direction.
17
With the propeller removed, open
the throttle slowly and check
that the motor shaft turns in an
anticlockwise direction (when
viewed from the front).
19
With the LiPo battery inserted
and the canopy refitted, check
the balance point. This should be
38mm back from the leading edge
of the wing, measured at the root.
38
mm
