Aremeca CH1-1250B, Руководство по эксплуатации

Страница: 11 / 20

RE. ENR.110 - Rév B – le 15/03/2014 page : 11
Chap.4 - Procedure
Procedure for pressure generator models CH1-125B and CH2-125B
> Hydraulic diagram
> Pressure mounted
> Observe the maximum operating pressures
of the pressure generator
Maximum operating pressure : CH1-125B

125 bar and CH2-125B

125 bar
a) Connect the instrument to be tested
b) Check the valve A is open
c) Check the capstan 1 the pressure generator is in end position stop.
d) Close the valve A , turn the capstan 1 in the direction of clockwise : you can build up pressure up to
120 bar (Maximum operating pressure : 150 bar)
e) Make the measurement point.
> Reduce pressure
f) After the readings measures, turn the capstan 1 in the opposite direction clockwise until the
end position of the stop and slowly open the valve A
g) The instruments can be disassembled.