Aremeca CH1-1250B, Руководство по эксплуатации

Страница: 14 / 20

RE. ENR.110 - Rév B – le 15/03/2014 page : 14
Procedure for pressure generator models CH2-1250B and CH2-2000B,
CH2-4000B and CH2-7000B and CO-800B and CO-1000B
> Hydraulic diagram
> Pressure mounted
> Observe the maximum operating pressures
of the pressure generator
Maximum operating pressure : C0-800B

850 bar and CO-1000B

1050 bar
CH2-1250B  1270 bar and CH2-2000B  2020 bar and CH2-4000B  4020 bar
and CH2-7000B

7000 bar
a) Connect the instrument to be tested (G1/2<1200bar / M16x150>1200 bar)
b) Check the valves A and B are open
c) Check the capstan 1 pressure generator is in the end position.
d) Close the valve A , turn the capstan 1 in the direction of clockwise : you can build up pressure
up to 120 bar (Maximum operating pressure : 150 bar). Make readings of measurements points in
this measuring
> To generate higher pressures, close the valve
B and open the valve A , turn the capstan 1 in
the direction of clockwise.
e) Realize the measurement point.
>
Reduce Pressure
f) After the measurement point readings, turn the capstan 1 in the opposite direction of
clockwise until the stop end position and open the valve B .
g) The instruments can be disassembled.