User’s Manual
–
A
REBO
S Infrared heater 2500 W with remote control
13
•
The reflector and filament must be cleaned with a soft cloth, a smooth brush or cool or dry
air. The cloth may be damp but never too wet and the cleaner should not include any
chemical.
•
Do not use detergents that can damage the reflector. The wiping must be done very carefully
without scratches.
•
Insert the wire grid using a slotted screwdriver.
Make sure the heater does not have these errors:
•
Check if the thermostat can be switched on or off.
•
Check that the heater is properly connected to the electrical wiring.
•
Check the intactness of the electrical wiring.
7.4 Service and repair
•
If there is any damage or discrepancy on your device, it must only be checked and repaired
by a specialist. This can be a recognized electrician. Damage or malfunctions that occur as a
result of unauthorized repair, as well as changes to the device, misuse, negligence and
improper and inadequate maintenance invalidate the warranty. The manufacturer cannot be
held liable.
