User’s Manual
–
A
REBO
S Infrared heater 2500 W with remote control
10
•
Press the function button again, the buzzer will beep once, the display P3 will appear on the
screen and the indicator will flash three times to indicate that the unit is in high operating
mode.
•
Press the function button again. You can select a low, medium, and high level, the P.0
indicator appears on the screen, and the indicator flashes three times to indicate that the
unit is in standby mode.
•
If you press the function button continuously, "P0 - P1 - P2 - P3 - P0" appears on the display
according to the device mode "standby --- low --- medium --- high --- standby".
•
If you press the timer button in standby mode, you can set the time from 1 to 24 hours on
the device. After setting the time, the indicator lights up, which indicates that the unit has
been selected as a timer function. "0" indicates the time not set.
•
When the device is in operation, the digital screen always displays the power status (P1-P2-
P3). The timer setting means that the device has set a timer function from 1 to 24 hours. To
display the regular time, press the timer button; the displayed time is the current setting
time. At this time, the indicator will also flash three times to indicate that the unit has
entered the timer setting status.
•
After the function is switched on, the time can be set from 1-24 hours with the digital screen
displaying (0.1) a time of one hour and (0.2) a time of two hours.
