Area Imager IG610/BT, Руководство по настройке

Страница: 104 / 196

95
CODE 93
Enable/Disable Code 93
To enable or disable Code 93, scan the appropriate bar code below.
Enable Code 93
< Disable Code 93 >
Set Lengths for Code 93
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for Code 93
to any length, one or two discrete lengths, or lengths within a specific range.
y One Discrete Length - Select this option to decode only Code 93
symbols containing a selected length. Select the length using the
numeric bar codes in
Appendix D, Numeric Bar Codes . For
example, to decode only Code 93 symbols with 14 characters, scan
Code 93 - One Discrete Length, then scan 1 followed by 4. To
correct an error or to change the selection, scan Cancel barcode.
y Two Discrete Lengths - Select this option to decode only Code 93
symbols containing either of two selected lengths. Select lengths
using the numeric bar codes in
Appendix D, Numeric Bar Codes .
For example, to decode only those Code 93 symbols containing
either 2 or 14 characters, select Code 93 - Two Discrete Lengths,
then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan Cancel barcode.