Ardo SM2738, Основное руководство, Страница: 19 / 108

19
SM2738
GB
INSTALLING THE MACHINE
9
LEVELLING THE WASHING MACHINE
WHERE PROVIDED, use the handling wheel to help moving. To use it, push the lever
on the bottom right moving it to the other side. Move the lever back to the original
position after moving (fi g.8).
UNPACKING AND UNBLOCKING THE MACHINE
8
7
▼
Remove the polystyrene spacer (fi g. 7).
10
11
CONNECTING TO THE POWER SUPPLY
Make sure that the voltage indicated on the identifi cation plate
attached to the inside of the fi lter door corresponds to that of the
mains supply (fi g. 10)
All cut-outs, electric wiring and mains sockets must have a rating such that
enables them to support the maximum load indicated on the identifi cation plate.
Once the appliance has been installed, it must be connected to the mains supply
through a single-pole switch.
The mains supply to which the appliance is connected must be fi tted with an
earthing system. If this is not the case, the manufacturer will not be held liable
for any incidents that may occur (fi g. 11).
If the mains socket to which the appliance is connected is faulty or unsuitable,
it must be replaced by a qualifi ed electrician.
The washing machine must not be connected to the mains supply using indirect
methods such as extension leads or multiple adapters.
During maintenance work, the washing machine must be disconnected from
the mains electricity supply.
Having chosen the adapt place, set the adjustable feet well so that the machine is
level (Fig. 9).
Pay particular attention to the choice of the position, to levelling the washing machine
and to securing the counternuts.
If the washing machine is not levelled correctly, it will be instable
and make noise when operating causing damage.
If the machine is placed on a rug, make sure that air circulates freely between the
washing machine and the fl oor.