background image

Stingray

 Model

Page 4

GetEskimo.com

GetEskimo.com

800-345-6007

®

•  Always keep hands, feet, hair and loose clothing away from any 

moving parts on engine and auger.

•  Do not allow children to operate this power auger. Do not allow 

adults to operate the auger without proper instruction.

•  Do not operate any power equipment under the influence of alco-

hol or drugs.

•  Keep all screws, nuts and bolts tight.
•  Engine should be turned off and cool, spark plug wire must be 

removed from spark plug before any repairs are attempted.

•  Temperature of muffler and nearby areas may exceed 150º F (65º 

C). Avoid these areas.

•  Never run engine indoors or in an enclosed area. Engine exhaust 

contains carbon monoxide, an odorless and deadly gas.

•  If the ice auger becomes unturnable in a hole, turn engine off and 

allow to cool before attempting to remove it manually. 

ENGiNE SAFEtY PRECAutiONS

Warning Carbon Monoxide Poisoning

All engines contain carbon monoxide in their exhaust. Carbon 
monoxide is a deadly, colorless, tasteless, odorless gas which 
may be present even if you do not smell or see any engine 
exhaust. Levels of carbon monoxide, which can be deadly, 
can be present for days in an enclosed area that has poor 
ventilation. Any level of carbon monoxide, if inhaled, can cause 
headaches, drowsiness, nausea, dizziness, confusion and 
eventually death. If you experience any of these symptons, 

seek fresh air and medical attention immediately.
Preventing Carbon Monoxide Poisoning

•  Never run engine indoors.
•  Never try to ventilate engine exhaust indoors. Carbon mon-

oxide can reach dangerous levels very quickly.

•  Never run engine outdoors where exhaust fumes may be 

pulled into a building.

•  Never run engine outdoors in a poorly ventilated area 

where the exhaust fumes may be trapped and not easily 
taken away. (Examples include: in a large hole or areas 
where hills surround your working area.)

•  Never run engine in an enclosed or partially enclosed area. 

(Examples include: buildings that are enclosed on one or 
more sides, under tents, car ports or basements.)

•  Always run the engine with the exhaust and muffler pointed 

in the direction away from the operator.

•  Never point the exhaust muffler towards anyone. People 

should always be many feet away from the operation of the 
engine and its attachments.

Gasoline Fires or Handling Fuel Safely

Fuel and fuel vapors are highly flammable. Never use fuel 
where a spark or flame may be present. Never use fuel where 
a potential source of ignition could occur. (Examples include: 

water or space heaters, clothes dryer, electric motors, etc.) 
Keep flames and sparks away from engine and fuel to prevent 
fires. Fuel fires spread very quickly and are highly explosive.

Prevention of Gasoline Fires

•  Never fill your fuel tank with fuel indoors. (Examples 

include: basement, garage, barn, shed, house, porch, ice 
shelter, etc.)

•  Always fill fuel tank outside in a well ventilated area.
•  Never remove the fuel cap or add fuel with the engine run-

ning. Stop engine and allow to cool before filling.

•  Never drain fuel from engine in an enclosed area.
•  Always wipe up excess (spilled) fuel from engine before 

starting. Clean up spilled fuel immediately.

•  Allow spilled fuel to dry, after wiping and before starting.
•  Allow fuel fumes/vapors to escape from the area before 

starting engine.

•  Test the fuel cap for proper installation before starting and 

using engine.

•  Always run the engine with fuel cap properly installed on 

the engine.

•  Replace fuel cap that allows gas to spill or leak.
•  Never smoke while refilling engine fuel tank.
•  Prevent fire and explosion caused by static electric 

discharge. Use only non-metal, portable fuel containers 
approved by the Underwriter’s Laboratory (U.L.) or the 
American Society for Testing & Materials (ASTM).

•  Do not store engine with fuel in fuel tank indoors. Fuel and 

fuel vapors are highly explosive.

•  Never pour fuel from engine fuel tank.
•  Never siphon fuel by mouth to drain fuel tank.
•  Always have an adult fill the fuel tank.
•  Never allow an adult or anyone under the influence of 

drugs or alcohol to fill the fuel tank.

•  Never allow children to fill the fuel tank.

BuRNS ANd FiRES

The muffler, muffler guard and other parts of the engine be-
come extremely hot during the operation of the engine. These 
parts remain extremely hot after the engine has stopped.

Prevention of Burns and Fires

•  Never remove the muffler guard from the engine.
•  Never touch the muffler guard because it is extremely hot 

and will cause severe burns.

•  Never touch parts of the engine that become hot after 

operation.

•  Always keep materials and debris away from muffler guard 

and other hot parts of the engine to avoid fires.

Содержание Eskimo S33Q8

















Отзывы: