background image

Stingray

 Model

Page

GetEskimo.com

GetEskimo.com

800-345-6007

®

ONE YEAR LiMitEd WARRANtY

Ardisam, Inc., a manufacturing company, warrants this Eskimo Ice Auger to be free from defects in the material or workmanship 
for a period of one year from the date of purchase.  During the one year warranty of this product, Ardisam will furnish 100% 
parts and labor to correct any defect caused by faulty material or workmanship. Warranty work must be sent directly to 
Ardisam, Inc. and performed by them or by an authorized service center. 

to obtain warranty service and/or replacement 

instructions, you must have prior approval before shipping package by calling our customer service department at 
800-345-6007 for a return material authorization number (RMA#).

 All items must be shipped prepaid. Ardisam, Inc. will 

at no charge, repair or replace, at their discretion, any defective part which falls under the conditions stated above. Ardisam 
retains the right to change models, specifications and price without notice. This product if used as intended, will give you 
years of trouble free service. We hope you will enjoy the quality of our products for years to come. 

For replacement parts, 

phone 800-345-6007 or go online to GetEskimo.com. 
This warranty applies to the original owner with a proof of purchase and is not transferable. It supersedes all other warranties 
either expressed or implied and all other obligations to liabilities on our part.  Ardisam, Inc. does not assume, and does not 
authorize any other person to assume for us, any liability in connection with the sale of our products. The warranty applies 
only to products which have not been subjected to negligent use, misuse, alteration, accident or repairs made by anyone 
not certified by Ardisam, Inc. This guarantee is void unless the warranty card is properly filled out and received by Ardisam, 
Inc., within 30 days of purchase.

Eskimo, A Division of Ardisam, Inc.

1360 First Avenue; P.O. Box 666

Cumberland, Wisconsin 54829

800-345-6007 · Fax (715) 822-2223

E-mail:  [email protected]

REGiStRAtiON

Record the model number and serial number (if applicable) in the space provided for easy reference. Fill out and mail the registration 
card located in the parts packet. Warranty is valid only if the completed registration card is received by Ardisam, Inc. within 30 days 
of purchase.

OWNERSHiP RECORdS

Place of Purchase:

Place of Purchase Address:

City:

State/Province:

Zip Code/Postal Code:

Model Number:

Serial Number:

Date of Purchase:

Notes:

Содержание Eskimo S33Q8

















Отзывы: