Ardi EZlock, Руководство пользователя

Страница: 32 / 35

32
② The following messages come after relative operating
errors(Fig-19). You can resolve the most of the issue by deleting
‘Lock’ or ‘Key’ and start over again. Please watch the YouTube
Demo Video before the installation.
(2) Hardware Reset Requirements and procedures
① Unlock the door by using any eKey or use an emergency
physical key; remove the battery cover and batteries as well.
Release three screws and detach the Rose Light Ring cable
from the EZlock device. The hardware’s Reset Button is on the
back of the controller board (Fig-20).
Fig-19