EN
36
EN
ELECTRICAL REQUIREMENT
WARNING: DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.
Недотримання цих вимог може призвести до смерті, пожежі або ураження
електричним струмом.
Перед переміщенням морозильної камери до місця встановлення дуже важ-
ливо переконатися в наявності належного електричного з’єднання.
RECOMMENDED EARTHING METHOD
A 220~240 Volt /50 Hz AC only 10 ampere fused and properly earthed electrical
supply is required. It is recommended that a separate circuit serving only this
appliance be provided. Use a receptacle which cannot be turned off with a switch
or pull chain. Do not use an extension cord.
NOTE:
Before performing any type of installation, disconnect the Freezer from the
electrical source. When you are finished, connect the Freezer to the electrical source
and reset the control to the desired setting.
LEVELING
If the Freezer is not leveled during installation. The doors may not close or seal
properly, causing cooling, frost, or moisture problems. It is very important of the
Freezer to be level in order to function properly.
To level your Freezer you may either turn the level leg clockwise to raise that side
to the Freezer or turn counter – clockwise to lower that side.
NOTE:
Having someone push against the top of the Freezer take some weight off the
leveling leg. This makes it easier to adjust the leveling leg.
USE OF THE APPLIANCE
To obtain the best possible results form your Freezer, it is important that you
operate it properly.
