ARDESTO ACM-12P-R290-PF1, Руководство пользователя и инструкция по установке

Страница: 126 / 151

126
EN

Page 17

Installation
Instructions
max 120cm or 47 inch
min 30cm or 12 inch
Expansion anchor
position
Adaptor cap
Wall Exhaust
Adaptor B
4. If desired, install the security bracket with 2 screws as shown.
5. Insert the window slider adaptor into the hole of the window slider.
Type 2: Wall Installation (For some models)
1. Cut a 125 mm (4.9inch) hole into the wall for the Wall Exhaust
Adaptor B.
2. Secure the Wall Exhaust Adaptor B to the wall using the four
Anchors and Screws provided in the kit.
3. Connect the Exhaust Hose Assembly(with Wall Exhaust Adaptor
A) to the Wall Exhaust Adaptor B.
or
NOTE: Cover the hole
using the adaptor cap
when not in use.

Page 16

Installation
Instructions
Installation
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Window
slider A
Window slider
B(if required)
Foam seal C
(Non-adhesive type)
Window slider A
Window slider B
(if required)
Foam seal C
(Non-adhesive type)
2 Screws
Security Bracket
2 Screws
Security
Bracket

Page 17

Installation
Instructions
max 120cm or 47 inch
min 30cm or 12 inch
Expansion anchor
position
Adaptor cap
Wall Exhaust
Adaptor B