ARDES AR5BR30, Инструкция по эксплуатации

Страница: 8 / 38

8 / 38
If possible, avoid the use of adapters and/or extension cables; if their use is absolutely
necessary, use only materials in compliance with the current safety regulations and
according to the electrical parameters of the adapters.
The device must not be switched on using external timers and/or other remote control
devices which are not specified in this manual.
DO NOT use or store the device near heat sources (heaters, stoves etc.).
DO NOT dip the device in water or other liquids; in case the accidental fall in the water DO
NOT try to take it out, but first of all unplug immediately the power cable from the socket.
If you use the device for the first time, make sure to remove any label or protective sheet
which blocks its proper functioning.
Plug and unplug the power cable with dry hands and hold it firmly.
Before plugging make sure the start button of the device is in the “OFF” position (turned off).
Always unplug the power cable to avoid the overheating and avoid stretching it (do not pull
it, tug it or use it to drag the device to which is connected). Avoid placing the power cable
on abrasive or sharp surfaces or in positions where it can be damaged easily.
DO NOT obstruct totally nor partially the air vents or inserts objects inside.
During the functioning do not touch the device with wet body parts, and in any case it is
recommended to have between you and the standing surface, an isolating element (for ex.
wearing shoes with rubber soles).
During the use the device must be keep at a safety distance from any object and/or
flammable or potentially explosive substance.
In case of malfunction or anomalies during the functioning, switch off the device immediately,
turn off the power and check the cause of the anomalies, if possible, with the support of a
qualified person. Avoid carrying out operations which are not specified in this manual (such
as disassembling and/or altering).
Always remember to unplug the power cable of the device if it is not used for a long period,
before storing, cleaning or performing any maintenance operation.
Store and use the device only indoor or in any case protected from weathering such as rain,
direct radiation of the sun and dust. The device is not design for the external use or storage.
The cleaning and maintenance of the device MUST NOT be done by children without the
supervision of an adult.
Before unplugging the device, switch it off, using the proper command on the control panel.
DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and
explained in this manual.
Place the device at a proper distance from the objects or surrounding walls making sure that
its functioning will not cause accidental damages.
DO NOT use the device near gas stoves or open flames in general.
DO NOT use the device near curtains or textiles.
DO NOT hang the fan on the wall or ceiling unless this type of installation is provided and
explained in this manual.
DO NOT cover the device during functioning.
DO NOT insert objects or body parts inside the protection grille of the fan.
DO NOT leave the device unsupervised for a long period during functioning.
DO NOT expose yourself for a long period to the air flow generated by the device because
it can cause damage to the health.
If the fan must be stored for a long period and is not used regularly, place the fan in its
original packaging in a dry place. When you use it for the first time after a long period of
inactivity, make sure the fan is clean and the motor blades turn feely (with the device not
powered) without any restraint.