6
GB
Instructions for use
GB
Maintenance
Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Do not use very wet substances, liquids or cloths to prevent water from entering into the appliance and
irreparably damaging it.
The heating element (4) must not be cleaned. Only if it is excessively dirty wipe with a damp cloth. Do not use
abrasive sponges. Make sure it is completely cold.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
AR1B01
The grill (1) can be washed in hot water with washing up liquid.
AR1B02
Remove the heating element only when it is completely cold.
The grill (1), the water tank (5) and the support base can be washed in hot water with washing up liquid.
Before reassembling the appliance, make sure that all the parts are completely dry.
First use
Before using the appliance for the first time, wash the parts intended for contact with food as indicated in the
MAINTENANCE section.
Note
: the use of water is not essential but decreases the spread of smoke which could be created while
cooking.
If you wish to use it,
do not pour too much in so that it does not spill out of the tank (5);
be careful not
to pour it on the heating element (4) and make sure that the level is below the heating element.
AR1B01
Make sure that the water tank is present, even if you do not want to use water.
If desired, pour the water into the tank.
Position the grill (1) by inserting the feet into the holes on the support base.
AR1B02
Insert the water tank, even if you do not want to use water.
If desired, pour the water into the tank.
Place the heating element on the base. The appliance has a safety switch which
activates when you remove the heating element by interrupting the power supply.
Position the grill (1) so that the feet are correctly positioned on the supports present on the support base.
The grill should be well detached from the heating element to prevent the food from coming into contact with
the heating element.
Insert the plug into the mains.
Turn the knob (2) clockwise to switch on the heating element. Turning the knob, you can increase or
decrease the operating temperature.
The indicator light (3) on indicates that the appliance is operating, and turns off when the temperature is
reached.
Wait a few minutes for the heating element to reach the operating temperature.