ARC-19509
ArcVision Technology Corp.
14
8.6.3 MOTION SET UP
On the menu of Figure 8-9, select
“
MOTION SET UP
”
, press <ENTER> key to enter next menu on Figure 8-12
8.6.3.1 ALL MOTION ENABLE
Set
“
NO
’
to disable all-channel motion detection.
Set
“
YES
”
allow user to enable motion detection for individual channel.
8.6.3.2 CHANNEL MOTION SET UP
On the menu of Figure 8-12, select one channel you want to do motion
set up, press <ENTER> key to enter next menu on Figure 8-13.
8.6.3.2.1 ENABLE
Set
“
YES
”
to enable the motion detection of this channel.
Set
“
NO
”
to disable the motion detection of this channel.
8.6.3.2.2 DETECTION WINDOW SET UP
Draw up the detection area. The whole screen was divided into 10x14
of detection cells. Each detection cell can be turned on or off
individually.
Select this item and press <ENTER>, then a pink cursor appear on
the screen. Move the cursor using blue arrow keys to target detection
cell press <+> key to turn on the cell, or <-> key to turn off the cell.
Once the detection cell is turned on it becomes green half-tone
.
Figure 8-12
8.6.3.2.3 SENSITIVITY
User can adjust detection sensitivity. If detection object is
small the value of sensitivity should increase until a
“
M
”
symbol appear on the right-bottom corner of screen.
8.6.3.2.4 BUZZER ENABLE
Set
“
YES
”
to enable buzzer. Once buzzer is enabled the
buzzer will active if motion occurs.
8.6.3.2.5 ALARM OUTPUT ENABLE
Set
“
YES
”
to enable relay. Once alarm output is enabled the
relay will active if motion occurs.
Figure 8-13
8.6.4 ALARM DURATION
The alarm output will keep for a time interval called alarm duration if a valid alarm occurs. The unit of the alarm duration is set in
second.
8.6.5 ALARM LIST
Set on
“
YES
”
to save the alarm event as a record, when a valid alarm occurs and to
“
NO
”
for not saving.
8.6.6 ALARM FULL SCREEN
Set on
“
YES
”
to switch to full-view of the related camera from quad-view, when a valid alarm occurs. It will take effect under
normal or sequence modes. Setting
“
NO
”
will keep the current viewing.
MOTION SET UP ▊▊▊
----------------------------
ALL MOTION ENABLE:NO
▊CH1 MOTION SET UP
▊CH2 MOTION SET UP
▊CH3 MOTION SET UP
▊CH4 MOTION SET UP
▊CH5 MOTION SET UP
▊CH6 MOTION SET UP
▊CH7 MOTION SET UP
▊CH8 MOTION SET UP
▊CH9 MOTION SET UP
CH1 MOTION SET UP ▊▊▊▊
------------------------------
ENABLE:YES
DETECTION WINDOW SET UP
SENSITIVITY:10
BUZZER ENABLE:YES
ALARM OUTPUT:YES
