Arctiko SF SERIES, Руководство по обслуживанию, Страница: 46 / 48

46
5f. Default settings
Label Name Range Set point Pr 1/2
Set Set point LS-US -62 ---
Hy Differential 0,1-25,5°C/1-225°F 1 Pr1
LS Minimum set point (-100°C – SET) (-148°F – SET) -63 Pr2
US Maximum set point (SET – 150,0°C) (SET - 302°F) -30 Pr2
Ot Thermostat probe calibration -12 - 12°C/-120 - 120°F 0 Pr1
Ods Outputs delay at start up 0 – 255min 0 Pr2
AC Anti-short cycle delay 0 – 50min 5 Pr1
CCt Continuous cycle duration 0,0 – 24,0h 0,0 Pr2
CCs Set point continuous cycle (-100 – 150,0°C) (-148 - 302°F) -62 Pr2
COn Compressor ON time with faulty probe 0 – 255min 60 Pr2
COF
Compressor OFF time with faulty
probe
-255min 5 Pr2
CH Kind of action CL=cooling;Ht=heating CL Pr2
CF Temperature measurement unit °C+°F °C Pr2
rES Resolution In=integer; dE=dec.point In Pr2
dLy Display temperature delay 0-20,0min (10sec) 0 Pr2
IdF Interval between defrost cycles 1-120h 0 Pr1
NdF Maximum length for defrost 0-255min 0 Pr1
dFd Displaying during defrost Rt, it, Set, DEF rt Pr2
dAd Max display delay after defrost 0-255min 0 Pr2
ALc Temperature alarms conf guration rE=related to set; Ab=absolute rE Pr2
ALU Maximum temperature alarm Set-110,0°C; Set-230°F 15 Pr1
ALL Minimum temperature alarm Set-100,0°C-set; Set-230°F-set 50 Pr1
AFH
Differential for temperature alarm
recovery
(0,1°C-25,5°C) (1°F-45°F) 1 Pr2
ALd Temperature alarm delay 0-255min 0 Pr2
dAo Delay of temperature alarm delay 0-23h e 50´ 4 Pr2
tbA Alarm relay disabling n=no; y=yes y Pr2
Aro
Alarm relay activation with power
failure
n(0); y(1) y Pr2
ALF
Alarm relay activation for all the
alarms
n(0); y(1) y Pr2
bon
Time of buzzer restart after muting, in
case og alarm duration
0 – 30 (min) 30 Pr2
AoP Alarm relay polarity (0A1=ALr) oP; cL cL Pr2
i1P Digital input polarity oP=opening; cL=closing cL Pr1
i1F Digital input conf guration
EAL, bAL, PAL, dor, dEF, Htr,
AUS
AUS Pr1
did Digital input alarm delay 0 – 255min 15 Pr1
nPS
Number of activation of pressure
switch
0-15 15 Pr2
odc Compress status when open door No; Fan; CPr, F_C No Pr2
rrd Regulation restart with for open alarm n – y y Pr2
HES Differential for energy saving (-30°C - 30°C)(-54°F - 54°F) 1 Pr2
Adr Serial address 0 – 247 1 Pr2
Pbc Kind of probe Ptc; ntc Pt1 Pr2
onF On/off key enabling Nu, oFF, ES oFF Pr2
rSE Real set point value Actual set --- Pr2
rEL Software release --- 1,6 Pr1
PTB Map code --- 1 Pr2