To turn the lights on, use the switch located on the evaporator cover in the top
part of the cell
“
A
”
.
4.2 LOADING OF THE PRODUCT
Place the shelves in the cell according to the type of subjects that you desire to
load, leave enough space between the shelves necessary to place the cans or bottles.
The cans can be stacked ,piling up two layers of cans in each shelf.
The shelves are designed to still remains some free space at full load it to allow
a good internal air circulation across the cell.
Do not plug these ventilation holes of the shelves with any subjects.
5. ORDINARY MAINTIENANCE
5.1 PRECAUTIONS FOR THE MAINTENANCE
The ordinary maintenance operations can be performed by not specialized personnel
following carefully the instructions clarified in this instruction manual.
ATTENTION: Before carrying out any cleaning or maintenance operations, disconnect
the appliance from the power supply. Do not destroy any safety devices.
5.2 CLEANING THE APPLIANCE AND THE ACCESSORIES
Before use, periodically clean the cooler and all its accessories with warm water
and neutral soap, rinse with clean water and wipe it dry.
Do not use detergents such as solvents or abrasive powders.
Clean the drainpipe hole positioned at the base of the cell.
Wash all the painted steel parts of the cooler with neutral detergents and protect
them with silicon wax.
5.3 CLEANING THE CONDENSER AND WATER TRAY
The frequency of the cleaning depends on the use and the location of the appliance.
ATTENTION: Disconnect power supply first, then remove the front ventilation panel
and clean the water tray and condenser. The periodic cleaning of the condenser is
necessary to guarantee and maintain the good performance and function of the
appliance. The manufacturer suggests do clean the condenser by using brush and vacuum
cleaner once every three months.
Caution: Do not wash the appliance with direct or high pressure water jets.
5.4 REPLACING THE LAMPS
The cell lamp is accessible by unscrewing the two screws which fix
the transparent protention cover
；
Discharge the screw on the side of the cell lamp cover,
take out the front panel,rotate it clockwise and take off the lamp
to replace the new one!
Attention: Replace the former one must cut off the power.
5.5 LONG INACTIVITY PRECAUTIONS
If the appliance is not going to be used for a long period, then these instructions
must be followed:
·
disconnect the plug from mains socket;
·
remove all the products and clean the cell and the accessories.
·
leave the door open in order to allow air circulation in the cell, this is to prevent
