17
Replacing the LED Light
The Arctica 200L & 400L refrigerators are fitted with energy efficient, LED lighting. In
the unlikely event that you need to replace the light, please follow the instructions
below:
Switch the refrigerator off at mains and remove plug from mains socket.
Remove the screws holding the LED cover in place using a screw driver and then
remove screws holding LED strip by same method.
Disconnect the LED strip at the connector block and replace with a new LED
strip.
Re-fix the LED strip and the LED cover to the product using the screws that were
previously removed ensuring that all screws are secure.
Re-connect the plug to mains socket and switch on.
Changing the Door Hinge
IMPORTANT:
Changing the door hinge requires
at least 2 people
and should not be
attempted on your own.
To change the door hinge on the 200L & 400L Arctica refrigerators, proceed as
follows:
1.
Switch off power at the mains socket and remove the plug from the mains
socket.
2.
Remove the top panel and disconnect the multi plug inside.
3.
Remove the hinge pin, and lift off the door.
4.
Move hinge from one side to the other.
5.
Move the handle from one side to the other.
6.
Place the door in the hinge on the desired side. Insert hinge pin in the hinge
and in the door hinge bush. Fasten the hinge.
7.
Re-connect the multi plug to the panel, and secure the panel. Re-connect to the
mains.
Note:
A series of pictorial instructions are available on request from our After Sales
department. Simply call 0844 815
0641
and one of our advisors will be able to send these
to you.
To change the door hinge on the 700L Arctica refrigerator, proceed as follows:
1. Remove the top hinge pin, lift off the door, and remove the bottom hinge pin.
2. Fit the bottom hinge pin on the desired side.
3. Place the door on the bottom hinge pin, fit the top hinge pin.
