7
Installation
Step 3: Preparing the
Adjustable Window Slider
1. Depending on the size of your window,
adjust the size of the window slider.
2. If the length of the window requires two
window sliders, use the bolt to fasten the
window sliders once they are adjusted to
the proper length.
Note: Once the exhaust eose assembly and adjustable window slider are prepared,
choose from one of the following installation methods.
Cut the adhesive foam seal
A and B strips to the proper
lengths and attach them to
the window sash and frame
as shown.
Insert the window slider
assembly into the window
opening.
Insert the window slider
adaptor into the hole of
the window slider.
Cut the non-adhesive foam
seal C strip to match the width
of the window. Insert the seal
between the glass and the
window frame to prevent
air and insects from getting into
the room.
Type 1: Hung Window Installation
Window slider A
Window slider B
Bolt
Foam seal B
(shorter adhesive type)
Foam seal A
(adhesive type)
Window slider A Window slider B
(if required)
Foam seal C
(non-adhesive type)
If desired, install the
security bracket with
2 screws as shown.
2 screws
Security bracket
Bolt
Window slider C
