Remote Controller Illustration
29
SHORTCUT Function
SWING Function
The SLEEP function is used to decrease
energy use while sleeping the same temperature
settings to stay comfortable are not necessary).
This function can only be activated with the remote
controller.
Note:
The SLEEP function is not available
in FAN or DRY mode.
Used to restore the current settings or resume
previous settings.
When pushing this button while the remote
controller is on, the system will automatically
revert back to the previous settings including the
operating mode, setting temperature, fan speed
level, and sleep feature (if activated).
If pressing for more than 2 seconds, the system
will automatically restore the current operation
settings including the operating mode, setting
temperature, fan speed level, and sleep
feature (if activated).
Used to stop or start the louver movement and set
the desired up/down air flow direction. The louver
changes 6 degrees in angle for each press (some
models without). If pressing for more than 2
seconds, the louver auto swing feature will activate.
How to Use the Advanced Functions
SLEEP Function
