8-3
8
MD2404
6. Remove the gas tank cap and lift off the panel.
MD2405
7. Remove the cotter pins; then remove the two
inner tie rod ends from the steering post.
MD2136
8. Remove the cotter pin; then remove the steering
post nut.
MD2417
9. Remove the steering post outer bearing cap and
remove the steering post assembly. Account for
the two nuts, the outer bearing cap, and the
two-piece plastic bearing.
NOTE: The inner bearing cap and the two spac-
ers do not need to be removed.
MD2142
CLEANING AND INSPECTING
NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is
necessary.
1. Wash the tie rod ends in parts-cleaning solvent.
Dry with compressed air. Inspect the pivot area
for wear. Apply a low-temperature grease to the
ends.
2. Inspect the tie rods for damaged threads or wear.
3. Inspect the tie rods for cracks or unusual bends.
4. Inspect all welded areas for cracks or deteriora-
tion.
5. Inspect the steering post and brackets for cracks,
bends, or wear.
! WARNING
Always wear safety glasses when using compressed
air.
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
