48
9. Remove the cap screws holding the clutch cover onto
the right-side crankcase half. Note the positions of
the different-lengthed cap screws for installing pur-
poses
.
10. Using a rubber mallet, loosen
the clutch cover;
then
pull it away from the right-side crankcase half.
Account for two alignment pins and gasket.
MD1115
D. Centrifugal Clutch Assembly
E. Oil Pump Drive Gear
F. Oil Pump Driven Gear
NOTE: Steps 1-10 in the preceding sub-section
must precede this procedure.
11. Remove the one-way clutch noting the direction of
the green dot or the word OUTSIDE for installing
purposes.
MD1286
12. Remove the left-hand threaded nut holding the cen-
trifugal clutch assembly.
MD1014
MD1016
13. Remove the cam chain.
FI630
14. Remove the oil pump drive gear cap screw.
MD1018A
15. Remove oil pump drive gear. Account for the pin.
CAUTION
Care must be taken when removing the nut; it has
“left-hand” threads.
Manual
Table of Contents
FOR ARCTIC CAT ATV DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com