Arctic Cat DVX 250 Скачать руководство пользователя страница 7

Страница: 7 / 108

WARNING

Indicates a potential hazard that could

result in a serious injury or death.

AN ATV IS NOT A TOY AND CAN BE HAZARDOUS TO
OPERATE.

Always check for obstacles before operating in a new area. Never

attempt to operate over large obstacles, such as large rocks or fallen

trees. Always follow proper procedures when operating over

obstacles as described in this manual.
Always be careful of skidding or sliding. On slippery surfaces, such

as ice, go slowly and be very cautious in order to reduce the chance

of skidding or sliding out of control.
Never operate an ATV in fast flowing water or in water deeper than

the footrests. Remember that wet brakes may have reduced

stopping capability. Test your brakes after leaving water. If

necessary, apply them lightly several times to let friction dry out the

pads.
Always be sure there are no obstacles or people behind you when

you operate in reverse. When it is safe to proceed in reverse, go

slowly. Avoid turning at sharp angles in reverse.
Always use the size and type tires specified in this manual. Always

maintain proper tire pressure as described in this manual.
Never improperly install or improperly use accessories on this

ATV.
Never install a twist grip throttle on this ATV.
Never exceed the stated load capacity for an ATV. Cargo should be

properly distributed and securely attached. Reduce speed and

follow instructions in this manual for carrying cargo or pulling a

trailer and allow greater distance for braking.
No one under the age of 16 should operate this ATV. Some

operators at the age of 16 may not be able to operate an ATV safely.

Parents should supervise the use of the ATV at all times. Parents

should permit continued use only if they determine that the operator

has the ability to operate the ATV safely.

250_DVX MANUAL

02.08.2006, 15:22 Uhr

Содержание DVX 250













































































































Результаты поиска

Содержание DVX 250

Отзывы:

Arctic Cat DVX 250, Руководство оператора, Страница: 7 / 108

Результаты поиска

Содержание DVX 250

Отзывы: